Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1.
Attach the Handle
F1
F1. M6 - 1.00 x 15 hex-bolt
Position the handle over the threaded inserts on the right side
of the cabinet. Attach handle with M6-1.00 x 15 hex-bolts (F1)
(4) and tighten with 10 mm wrench (provided).
10-Apr-2020 12:07:31 EDT | RELEASED
2.
F2
F1
F2. M8 - 1.25 x 25 hex-bolt
Use two or more people to move, assemble or install
cabinet.
Failure to do so can result in back or other injury.
Push in all the cabinet drawers fully and lock using the key. Using
two or more people, lay the cabinet down on its back with the
drawers facing upward. Protect the cabinet back finish by laying it
down on the saved cardboard packaging material.
Attach the swivel casters to the cabinet, on the same side as the
handle, using M8-1.25 x 25 hex-bolts (F2) (8) and tighten with the
provided 12 mm wrench. Attach the fixed casters to the cabinet,
on the opposite side as the handle, using M8-1.25 x 25
hex-bolts (F2) (8) and tighten with the provided 12 mm wrench.
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Attach the Casters
Fixed casters
WARNING
Excessive Weight Hazard
F2
Swivel casters
5
Tabla de contenido
