Orbegozo DS 75XXX BL.N Manual De Instrucciones página 15

DS 75XXX BL.N / DS 80XXX BL.N
- Place "U" plate on desired height, mark and drill two holes on the wall, put the screw plugs and
screw the plate to the wall.
- Go up the top chimney until "U" plate and screw top chimney to "U" plate.
Installation (vent inside)
If you don't have outlet to outside, the extractor tube will not be necessary and the installation will be as
previous section.
The carbon filter (not provided) can be used to avoid odors. To install carbon filter, first you should remove
grease filter. Pulse block button and pull.
Place the carbon filter in the motor as below picture shows and turn it until sound "click". Do the same on
the other side.
15