Facom 779.CL3 Guía De Instrucciones página 5

OPERATION
- Before first use, charge the 779.CL3 inspection lamp for 3 hours.
The LEDs on the lamp blink to indicate charging. Once charging is complete, the LEDs are switched off.
- When switched on, the lamp's intensity increases gradually to preserve LED lifetime.
- The lamp's light intensity rises gradually when it is turned on to preserve the lifetime of the LEDs.
-
When the operating time left drops to 1/4 hour, the lamp switches off and switches on instantly every
15 seconds.
- Batteries are sensitive to temperature: autonomy variations can occur at low temperatures.
- The
industrial shops (white spirit, petrol, diesel fuel, brake fluid, engine oil).
MAINTENANCE
- Never immerse the
- Use a dry cloth with soapy water to clean your
- Use only FACOM spare battery packs, reference
- Using non-compliant packs or improper usage can cause leaks or an explosion which would damage the lamp.
- Use only the
electrical hazard and start a fire.
- Before any prolonged use of the lamp, perform a full discharge-recharge cycle.
This product has been designed and manufactured using high quality, recyclable and reusable materials and
components.
The crossed wheeled bin symbol applied to the product indicates that it complies with European Directive
2002/96/EC.
Please inquire about the collection of electrical and electronic products in your area.
Please comply with the local regulations. Do not dispose of this product with your normal household waste.
Before disposing of lamp 779.CL3, remove the battery
regulations.
WARNING: Replace any leaking batteries. Wear goggles and gloves when handling this battery.
Used batteries must be placed in a leak-tight container for recycling in accordance with the local regulations.
779.CL31
+
NU-779.CL3_0216.indd 5
779.CL3 inspection lamp resists to most products and solvents used in automotive repair and
779.CL3
inspection lamp in a cleaning product.
779.CL313
mains adapter supplied by FACOM. Using other mains adapters can cause
Li-ion batteries are consumables not covered by the guarantee.
The lamp's autonomy is specified for new batteries.
779.CL3 inspection lamp.
CL316
779.
.
779.CL316 and comply with local recycling
Li-ion
779.CL312
+
779.CL316
779.CL316
779.CL313
3/8/2016 4:14:51 PM