Trevi XT 10A8 BT Guia Del Usuario página 13

ENGLISH
USB/SD INPUT
1. Insert a USB memory in the socket (10) or an SD card in the input (9);
2. Turn on the unit, the playback of the tracks will start automatically, if this does not happen press the
M button (7) on the unit several times and select the USB/SD Card function, or press MODE button
(24) on the remote control;
3. To pause playback, press
4. To resume playback, press
5. Press (3) or
control, while listening to move to the previous or next
Note:
- The player may not support some USB devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension
cables.
- From the computer format the USB memory in FAT (16 or 32).
RECHARGE OF EXTERNAL DEVICES
The device can also be used to charge external devices such as smartphones, MP3 players, etc...
Make sure that the voltage and current supplied by the device are correct for the device to recharge.
Connect the external device to the USB CHARGE (11) jack.
BLUETOOTH
1. Turn on the unit and press the M button (7) on the unit repeatedly, or press the MODE button (24)
on the remote control and select the BLUETOOTH function;
2. The "bt" word will appear on the display and the system will automatically enter pairing mode with
external devices;
3. Activate the Bluetooth functionality on the external device to be paired and start searching for the
devices. At the end select the "XT 10A8 BT" device;
4. Enter the "0000" password if required;
5. Once paired, a short confirmation tone will sound;
6. Press (2) button on unit, or
again to stop playback
7. Press (3) or
control, while listening to move to the previous or next track.
AUX-IN INPUT
- Use a 3.5mm Stereo jack cable or an RCA cable to connect the AUX-IN inputs (14 and 15), located
behind the unit, to the audio output of the TV, DVD or another device/source;
1. Press the "Power" button to turn the speaker on;
2. Press the M button (7) on the unit repeatedly, or press the MODE button (24) on the remote control
and select AUX-In mode:
3. Use the controls on the connected device to begin playing music.
button (2) on the unit, or
button again;
(6) button on the unit, or
(29) button on the remote control to start playback; press it
temporarily;
(6) button on the unit, or
button (29) on the remote control;
/CH- (17), /CH+
track.
/CH- (17), /CH+
13
XT 10A8 BT
(27) button on the remote
(27) button on the remote