Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
1. Before beginning, disconnect power by removing fuse or turning off circuit breaker.
2. It is essential that the structural member from which the fan is to be suspended will safely support the fan.
In view of the torque and weight factors involved. Some hangers will require additional strength by securing
more firmly to wood beams or steel supports.
3. Screw hook through center of hanger into beam or ceiling.
4. Fix Fork Pipe to the motor shaft. Tighten the bolt and nut firmly. Make sure the cotter pin is inserted and bent.
5. Tie the safety wire as shown in Figure 1-5 and screw safety wire to the pipe firmly.
6. Safety wire must be tied to 'U' hook or 'J' hook.
7. Assembly the other end of the pipe with the pulley to the ceiling hook. Insert the cotter pin and bend.
ASSEMBLY INSTRUCTIONS
1. The fan has 3 wires connected to the tip of fan motor. -Grounding wire -power wires
2. Making sure the down rod is locked with setscrew.
3. Mount the fan blades on the motor with lock washer and screw.
4. Make wiring connections with regulators as shown on fig.2.
5. Slide the canopy up to the ceiling and tighten the screw.
6. Turn on the power and your fan will be ready for operation.
7. A contact separation of at least 3mm in all poles should be provided in the fixed wiring for disconnection
purpose.
OPERATION INSTRUCTIONS
Remote regulator for ceiling fan is supplied for installation. It is turned clockwise from the mark "1" to "5"
indicating the speed from slow to fast while turning counter-clockwise from "5" to "1" indicating from fast to
slow. And "0" means off .
Rubber Ring
Capacitor
Fan Blade
Shock Proof Washer
Upper Canopy
Suspension Pipe
Fixing Screw
Lower Canopy
Motor Head
Motor
6
INDUSTRIAL FAN
TVC048110MD
AC
Regulator
