Idiomas disponibles
Idiomas disponibles
SAFETY PRECAUTIONS
1. Installation by licensed electrician is strongly recommended.
2. Be sure electricity off at main switch before wiring.
3. All wiring must be in accordance with national and local electrical codes and this fan must be grounded
against possible shock.
4. When fan is mounted, blades must be at least 2.3m from floor.
5. Do not allow hands or other objects to contact rotating blades.
6. To reduce the risk of fire or electric shock, do not use this Fan With Any Solid-State Speed Control Device.
7. If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
8. This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Young children should be
supervised to ensure that they do not play with the appliance.
9. The appliance is not fitted with means for disconnection from the supply mains having a contact separation
in all poles that provide full disconnection under overvoltage category III, means for disconnection must be
incorporated in the fixed wiring in accordance with the wiring rules.
GENERAL
After opening the box, you should find the following parts.
one fan motor
one down rod
one regulator
one set of blades
two ceiling canopies
two mat slices
two openings sells
two spring coil washers
two hexangular nuts
two hexangular stud bolt Tools required
pliers
standard screwdriver
5
INDUSTRIAL FAN
TVC048110MD
