Camera Specifications - Cognex ISC-7800 Serie Manual

Camera Specifications

Specifications
1
Case Temperature
Storage Temperature
Humidity
Protection
Shock (Shipping and Storage)
Vibration (Shipping and Storage)
1
Case temperature can be verified using the camera's Temperature property within In-Sight Multi-Camera IDE,
which displays the camera's internal temperature in degrees Celsius. The internal temperature will be about 3 to 5
degrees above the camera case temperature. Refer to the In-Sight
A thermal scanner can also be used to determine the camera case temperature. Additional cooling measures are
required if the case temperature cannot be kept below 50°C. Examples of such measures include: extra heat sinking
and/or air movement.
7800
0°C to 50°C (32°F to 122°F).
-20°C to 80°C (-4°F to 176°F)
< 80% non-condensing
IP67 with all cables properly attached (or the provided connector plug
installed), the IP67-rated lens cover or illumination accessory properly
installed and the Micro SD card cover fastened in place.
IEC 60068-2-27: 18 shocks (3 shocks in each polarity in each (X, Y, Z)
2
axis) 80 Gs (800m/s at 11ms, half-sinusoidal) with cables or cable plugs
and appropriate lens cover attached.
IEC 60068-2-6: vibration test in each of the three main axis for 2 hours @
10 Gs (10 to 500 Hz at 100m/s
appropriate lens cover attached.
®
13
2
/ 15mm) with cables or cable plugs and
Multi-Camera User Guide for more information.
7802