LG V-CR323HT Serie Manual De Instrucciones página 13

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Your appliance is equipped with either a
paper dust bag (21) or a fabric dust bag
(26) (depending on model.)
Take hold of the dust bag by the handle
and pull. Remove the bag and throw it
away.
To refit a new bag push the cardboard
support of a new bag into the bag mount
(22) until it will go to further.
If your appliance is fitted with a fabric dust
bag (26) follow the instructions as follows:
Pull the clip (36) out and empty the fabric
dust bag, then set the clip back and push it
until it can close the dust bag completely.
Do not wash the fabric dust bag.
Note: as the appliance is fitted with a safety
device which checks that the bag is in place
you cannot close the lid if the bag is not fitted
correctly.
Cleaning the motor filter
The motor filter is situated inside the
appliance between the dust bag and the
motor. Each time that you change the air
outlet filter we advise you to remove the
motor filter (23) and clean it by tapping
to remove the dirt and then replacing it in
the vacuum cleaner.
Cleaning the air outlet filters
Depending on the model you have chosen
your appliance is equipped with different
types of filters: foam filter, electrostatic
filter or washable HEPA filter (24).
To change the filter or wash the HEPA
filter (24) Press the button (25) down, the
exhaust filter cover (38) is open, take the
HEPA filter (24) out.
To replace the cover after changing
or cleaning the filter, insert the cover (38)
by Pressing the exhaust filter cover (38)
untill the button locks the cover.
The foam filter should be cleaned regularly
by tapping it to remove the dirt.
The electrostatic filter should be changed
regularly. (approximately every 6 bag changes).
The washable HEPA filter should be cleaned
with cold and running water at least once a year.
- Do not use the brush.
- Allow HEPA filter to dry in a shaded place
for a day.
What to do if your appliance
does not work?
Check that the appliance is correctly plugged in
and that the electrical socket is working.
What to do when the suction
performance reduces?
Stop the appliance and unplug it.
Check that the tubes, flexible hose and
cleaning tool are not blocked.
Check that the dust bag is not full. Replace
if necessary.
Check that the air outlet filter is not blocked.
Replace if necessary.
- 13 -
E
Tabla de contenido
loading

Este manual también es adecuado para:

V-cr323htu

Tabla de contenido