Aplicaciones technologicas 520 Serie Manual Del Usuario página 8

1) SERIES 520 GENERAL DESCRIPTION
The clear trend towards the use of strobe light systems for emergency vehicle
signalling creates a need for new more powerful and versatile power supply units.
The SERIES 520 power supply units, with a programmable internal configuration,
have 4 outputs so as to be able to control from one to four strobe lights. They have 6
function modes, which allow the lights which are required and the kind of multiple flash to
be selected.
The supply unit comes with a standard program, which allows the different function
modes to be selected by means of 3 external switches (Group 1, Group 2 and quadruple/
double flash selection). The unit also has a high/low intensity function which can be selected
by means of a switch.
With an effective power of 50 W, it can be considered as a high performance device.
The electronic circuit is controlled by a microprocessor which can be programmed in
the factory with other special fucntion modes if circumstances so require.
Two versions of the program exist within the SERIES 520:
Model FA-520: Version for cars.
Model FA-520/M: Version for motorbikes.
2) MODEL FA-520 (Version for cars)
Model FA-520 is a power supply unit to which from one to four strobe lights can be
connected. This supply unit was designed for cars, for either front radiator grille lights, rear
lights, single lightbars, strobe heads, directional strobe lights,, etc.
2.1) SPECIFICATIONS
V o l t a g e :
Output power:
E n e r g y :
Number of outputs:
Function modes selection:
Frequencies of flashes:
Mode of operation in high or low intensity.
W e i g h t :
12 Vdc - 24 Vdc
50 W.
Double flash:
Quadruple flash:
4
3 external switches (6 function modes)
69 Quadruple flashes per minute
66 Double flashes per minute
750 grammes.
8
17.4 J. (main flash)
6.0 J. (secondary flash)
10.0 J. (main flash)
4.3 J. (secondary flashes)