Product Description And Specifications; Intended Use; Product Features - Bosch PUC-EXACT 1 Manual Origina

OBJ_BUCH-1527-002.book Page 11 Tuesday, December 20, 2016 1:08 PM
Symbols
The following symbols could have a meaning for the use of the
power supply unit. Please take note of the symbols and their
meaning. The correct interpretation of the symbols will help
you to use the power supply unit in a better and safer manner.
Symbol Meaning
V Volt Electric voltage
A Ampere Electric current
W Watt Power output
Hp Horsepower
Hz Hertz Frequency
Direct current Type of current and voltage
DC direct current
Single-phase Type of current and voltage
alternating
current
AC alternating
current
Protection In certain cases, products of
class I protection class I must be
according to connected to earth.
DIN: Protective
earth (protec-
tive conductor)
CE Marking With the CE Marking, Bosch
confirms the conformity of the
product with the appropriate
guidelines of the European
Community.
CSA Products with this certification
Certification mark were tested by the "Ca-
Marks nadian Standards Association"
and meet the applicable safety
and performance standards in
Canada and the USA.
Warning Informs the user of the correct
indication product handling or warns
against hazards.
Mandatory Provide information on correct
signs handling, for example: Use
product only in enclosed work
sites, Read operating instruc-
tions and Do not discard unit
into household waste.
Bosch Power Tools
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the fold-out
page with the illustration of the power supply unit and leave it
open.

Intended Use

The power supply unit is intended exclusively for the power
supply of Bosch industrial straight screwdrivers of the
C-EXACT series in enclosed locations.

Product Features

The numbering of the product features refers to the illustra-
tion of the power supply unit on the graphics pages.
1 Connection socket on power supply unit PUC-EXACT
2 On/Off switch
3 LED indicator, operational readiness
4 LED indicator, malfunction (overload)
(PUC-EXACT 1)
5 Mains cable
6 Socket sleeve on tool cord
7 Tool cord for connecting to the power supply unit
PUC-EXACT
8 Groove in the coupling of the tool cord 7
9 Connection plug of the power cord
10 Connection socket for power cord
11 Power plug
12 On/Off switch of the screwdriver
(lever start)
The accessories illustrated or described are not included as stand-
ard delivery.
English | 11
1 609 92A 3HG | (20.12.16)