Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6
6B
6A
HOT
6 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (either PEX or Copper Pipes) (6A) to Valve Body Inlets
(6B). Hot water supply lines go into left inlet. Cold water supply lines go into right inlet.
(Supply lines not included). Please follow manufacturer's instructions when installing
supply lines.
7
7 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
ENGLISH
6B
6A
COLD
MAINTENANCE & CARE
8
8A
8 VALVE CARTRIDGE REMOVAL
Turn off water and relive pressure before working on your faucet! Remove Screw
(8A) and Stem Extension (8B) from Valve Cartridge (8C). Unscrew Valve Cartridge
(8C) and inspect. Replace parts as necessary.
CAUTION: Maintenance
DISASSEMBLY
1.
Replacement parts may be available at the store where you purchased
your faucet.
2.
When replacement parts are not available, please write or call Pfister
Consumer Service.
3.
Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative finishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pfisterfaucets.com
• Installation Support
• Care and Warranty Information
3
8C
8B
Tabla de contenido
