Auto Shut Off; Operation Tips - Brentwood Appliances MG-400W Instrucciones De Operación Y Seguridad

Push the (seasoned) minced meat into the cutter housing. *If the skin gets
stuck onto the sausage horn, wet it with some water.
MAKING KUBBE
See below Figure 4
1. Insert the feeding screw into the cutter housing, the plastic end first.
2. Fit the Kubbe/cone attachment on the metal end of screw pusher, and then
fit the Kubbe former attachment. Make sure the notch of the Kubbe/cone
attachment fits into the opening of grinder head.
3. Fit the screw ring on the grinder head by turning the screw ring clockwise
until it is properly fastened.
4. Fit the cutter housing on the motor unit. The lugs on the motor unit must
fit precisely into the slots on the grinder head. Rotate the grinder head
counter-clockwise until you hear a click. The grinder head is then locked
into the position.
5. Place the hopper / tray on the upright part of the grinder head.
6. The appliance is ready for making Kubbe.
TEMP STOP/REVERSE
1. Keep pressing 'REV' button when the appliance is switched on, the
appliance will temporarily stop working. Release the button and the
appliance resumes working.
2. If the appliance is blocked, switch off the appliance first and then press the
'REV' button, the feeding screw will turn in the reverse direction. Then the
appliance can continue its normal operation.

AUTO SHUT OFF

This appliance is equipped with a thermostat system. This system will
automatically cut off the supply power in case of overheating. If this happens,
unplug the appliance and let the appliance cool down for 60 minutes (1
hour). After that the appliance can resume working.

OPERATION TIPS

- Never use your finger or an object to push ingredients down the feed tube
while the appliance is running. Only the pusher is to be used for this
purpose.
6