Tripp-Lite U357-025-2 El Manual Del Propietario página 4

Installation
8. After changing the DIP switches as desired, hold down the Reset
button until the LEDs quickly blink. If successful, the LED next to the
chosen setting will stay on.
9. Power on the unit by connecting the included USB 2.0 power cable
between the DC In port and your computer's USB port or a USB
charger.
10. Connect the included USB 3.0 cable between the unit's USB port
and the host computer's USB port.
11. The unit is now ready to use.
RAID Mode
This unit can be set to function in one of three modes: JBOD, RAID1 or
RAID2. Each mode is described below along with their corresponding
DIP switch setting.
RAID Mode
JBOD
RAID1
RAID0
17-02-025-93368C.indb 4
Description DIP Switch 1
Allows access Down
to both drives
simultaneously
Creates Down
duplicate
drives for data
redundancy
Combines both Up
drives into one
larger drive to
improve system
performance
4
DIP Switch 2
Down
Up
Up
2/6/2017 5:02:57 PM