Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Fault Elimination
Diagnosis
LED of the IR C-disc
blinks continuously:
LED of the IR C-disc
does not blink when
a signal is transmitted:
Relay Insert cannot be - Remove illuminating device
operated via the
extension:
Light is not on:
Cause/Remedy
- Remove extraneous IR light
source
- Check IR signal reception
- Replace battery of the IR
handheld, or wall-mounted,
transmitter
- IR transmission range has
been exceeded
from pushbutton extension
- Replace defective lamp
- Replace/re-energize line-side
fuse
- Repair broken incoming line
GB
Tabla de contenido
