Tabla de contenido
Important! The fitting must be installed, flushed
and tested after the valid norms!
The mesh washers must be installed to protect
against incoming dirt by pipework. Incoming dirt
can impair the function and/or lead to damages
on functional parts of the fixture; HansGrohe will
not be held liable for resulting damages.
Important! The mixer can not used together
with a continuous flow water heater.
The hot and cold supplies must be of equal
pressures.
Technical Data
Operating pressure:
Recommended operating pressure:
MPa
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Rate of flow:
Maximum flowing-out temperature at 50 K
temperature difference and 0,3 MPa flow
pressure:
Test certificate
DVGW
31100000
31101000
10
Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440
max. 1 MPa
0,1 – 0,5
1,6 MPa
max. 80°C
65° C
5,50l/min 0,3 MPa
42° C
P-IX
SVGW
P-IX
18314/A
P-IX
18314/A
E-Mail: [email protected] · Internet: www.hansgrohe.com
English
Follow-on time: 1,5 s
Rise-delay time: 300 ms
Automatic switching-off: after 1 min
battery
Spare parts see page 3
1
aerator cpl.
2
solenoid valve
3
fixing set
4
connection hose
5
electronics
6
electronics
7
battery
8
service tool
ACS
X
X
Lithium CR-P2/6V
NF
WRAS
98612000
96904000
13961000
98809000
96456000
96905000
97399000
98808000
KIWA
Tabla de contenido
