English - AEG KF33 Serie Manual De Instrucciones

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
ON/OFF switch with power indicator light
A.
Water tank
B.
Water level indicator
C.
Hinged lid
D.
Picture page 2-3
GETTING STARTED
1
Place the machine on a flat surface.
machine with the ON/OFF switch. Let a full tank of water pass through the machine once or twice to clean it, without
using paper filter or coffee.
2
Making coffee: open the lid and fill the water tank with fresh cold water up to the desired level. There is a gauge for cups on
the water tank and on the coffee jug. (The machine must not be used with empty tank!)
3
Insert a size 1x4 paper filter in the filter holder and fill it with ground coffee. For average strong coffee one measuring
spoon (approx. 6-7 g) per cup is sufficient. Close the water tank lid and place the jug (complete with lid) onto the warming
plate.
4
Start the machine with the ON/OFF switch. The power indicator light will come on and hot water will flow into the filter.
When water has stopped flowing, the warming plate keeps the coffee hot until the machine is turned off with the ON/OFF
switch. If the machine is not turned off manually, the Safety Auto-Off function turns it off after 40 minutes.
5
If the jug is removed, the filter valve prevents coffee from dripping onto the warming plate. (While boiling, the jug must not
be removed for longer than 30 seconds or the filter will overflow.)
CLEANING AND CARE
6
Turn the machine off and unplug the power cord. Wipe all outer surfaces with a damp cloth. Coffee jug and jug lid are
dishwasher proof. Never use caustic or abrasive cleaners, and never immerse the machine in liquid!
7
To clean the filter holder, lift up the handle and remove the filter holder. To clean the filter valve thoroughly, rotate it several
times while it is being rinsed.
8
Decalcifying is recommended regularly, depending on water hardness. Fill the tank with water and decalcifier according to
product instructions, then follow steps 9 and 10.
9
Place the coffee jug with its lid onto the warming plate. Allow the decalcifier to take effect for about 15 minutes, then switch
the machine on. Switch it off when the solution has finished flowing through. If necessary repeat the decalcifying process.
10
Allow the machine to run at least twice with plain water. Then thoroughly rinse the coffee jug, lid and filter holder under
running water, activate the filter valve repeatedly during the rinse process.
Enjoy your new AEG product!
www.aeg.com
KF33xx_CoffeeMaker_AEG_NEW.indd 6
Filter holder with anti-drip valve
E.
Coffee jug with graduation on both sides
F.
Warming plate
G.
Power cord & plug
H.
When starting the machine for the first time,
fill the tank with cold water. Start the
6
2017-06-05 11:19:18