After Each Operation; Storing The Appliance; Transport; Close The Suction Connection, See Wet Vacuum - Würth ISS 45-M automatic Traducción Del Manual De Instrucciones De Servicio Original

Turn off the appliance
 Switch off the appliance at the main switch.
 Pull out the mains plug.

After each operation

 Empty the container.
 Vacuum and wipe the appliance inside and
outside with a damp cloth.

Storing the Appliance

Illustration
 Store the suction hose and the mains cable as
shown in the illustration.
 Place the appliance in a dry room and secure
it from unauthorized use.

Transport

CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you trans-
port it.
 Close the suction connection, see wet vacuum-
ing.
 Remove the suction pipe with the floor nozzle
from the holder. Hold the appliance at the han-
dle and at the suction pipe to transport it.
 When transporting in vehicles, secure the ap-
pliance according to the guidelines from slip-
ping and tipping over.

Storage

CAUTION
Risk of injury and damage! Note the
weight of the appliance in case of stor-
age.
This appliance must only be stored in interior
rooms.
22

Maintenance and care

DANGER
First pull out the plug from the mains be-
fore carrying out any tasks on the ma-
chine.
ATTENTION
Keep the device and the ventilation lou-
vres clean in order to be able to work
well and safely.
If the vacuum cleaner should fail inspite of thor-
–
ough manufacturing and testing procedures,
have the repair performed by a Würth master-
Service centre.
Please indicate the part number taken from the
–
type plate of the vacuum cleaner in case of
questions or spare parts orders.
Dust extracting machines are safeguards for the
prevention or elimination of hazards defined in the
regulations of BGV A1.
In order to carry out maintenance work, the
–
user must disassemble, clean and service the
unit, in so far as this is possible without endan-
gering maintenance personnel and other per-
sons. Suitable precautions include decontami-
nation before the unit is disassembled. Precau-
tions must be taken for local filtered forced air
ventilation at the place where the unit is disas-
sembled, the cleaning of the maintenance sur-
face and suitable protection of the personnel.
The outside of the unit should be cleaned thor-
–
oughly and any harmful substances removed.
Alternatively, a sealed coating may be ap-
plied before the unit is removed from the dan-
ger area. All unit parts are to be considered
contaminated when they are removed from
the danger area. To avoid distribution of the
dust, you must take the appropriate measures.
In the framework of maintenance and repair
–
work all contaminated objects that cannot be
cleaned satisfactorily must be disposed of.
Such objects must be disposed of in imperme-
able bags in accordance with the valid provi-
sions for the disposal of such waste.
GB - 6