Overview; Package Contents; Optional Accessories; Important Safety Instructions - Tripp-Lite SmartOnline SUINT3000RTXL2U El Manual Del Propietario

1. Overview

The Tripp Lite SmartOnline Rack/Tower System is an on-line, double-conversion UPS offering the
highest level of power protection. Delivering a clean sine wave output and with zero transfer time to
battery in the event of a utility failure, the UPS is suitable for all advanced networking applications.
Each system provides long running battery support with optional extended-run and SNMP/Web
communication ability. Built-in interfaces include USB, RS232 serial and Emergency Power Off
(EPO). The front panel display provides detailed UPS status including battery level and status,
operating mode and load level.

1.1 Package Contents

• UPS
• IEC-320-C19 to C20 Detachable Power Cord (1.5 m)
• 2 x IEC-320-C13 to C14 Detachable Power Cord (1.8 m)
• 4-Post Rail Kit
• Rack-Mount Ear Kit
• USB Cable
• RS232 Cable
• Owner's Manual

1.2 Optional Accessories

• WEBCARDLX: Internal network interface card for SNMP/Web control and monitoring.
• 2POSTRMKITWM: Supports rack-mount UPS and battery packs in 2-post rackmount or
wall-mount configurations.
• 2-9USTAND: Supports rack-mount UPS and battery packs in an upright tower configuration.
• External battery packs: Support extended runtime. Compatible models include BP72V15-2U
(Limit 1), BP72V18-2US (Multiple) and BP72V28RT-3U (Multiple).
Visit the specification page for your UPS system at www.tripplite.com for detailed extended runtime
data and additional accessory options.

2. Important Safety Instructions

SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the
installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these
warnings may affect your warranty.

UPS Location Warnings

• Install the UPS indoors, away from excess moisture or heat, conductive contaminants, dust or
direct sunlight.
• For best performance, keep the indoor temperature between 0º C and 40º C.
• Leave adequate space around all sides of the UPS for proper ventilation.
• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this
manner will seriously inhibit the unit's internal cooling, eventually causing product damage not
covered under warranty.
18-09-247-933652.indb 2
2
2/13/2019 3:27:24 PM