Product Registration - Tripp-Lite SR16SHELF El Manual Del Propietario

Installation
Installing the Shelf Tray
Attach and secure the shelf to the front vertical rails of the rack
enclosure using the six included fasteners, washers and cage nuts.
Note: Make sure there is ample clearance within the rack enclosure installation for
easy device placement and storage.
Installing the Shelf Dividers
The SR16SHELF can accommodate up to 15 shelf dividers. To insert
a divider, insert its bottom slide tabs in the shelf's slots
the divider in to lock into place
divider.
Adjusting the Shelf Dividers
Note: Adjusting or removing the shelf dividers requires rear access to the shelf tray.
Depending on the rack enclosure type and size, the shelf tray may need to first be
removed.
Remove any personal electronic devices stored on the shelf tray. To
rearrange or remove the dividers, push in the two tabs securing the
divider to the rear end , then push the divider forward to disengage
1
from the shelf tray . Repeat as necessary for additional shelf
2
dividers.

Product Registration

Product Registration
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
, then push
1
2 . Repeat for each additional shelf
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
2
2
2
1
1