PROZIS SYMPH Manual Del Usuario página 10

EN
DESIRED STATUS
RESULT CONDITION
Device pairing 1. 1st-time
pairing with
soundpods
switched on
2. Powered off
3. Already
paired with
one device
18
ACTION
1. One of the
soundpods will try to
pair with the device
automatically. Activate
your device's BT
function. Search and
select 'PROZIS SYMPH
L' or 'PROZIS SYMPH R'
from the list of devices
to connect. Once one
of the two soundpods
has been successfully
connected, the other
soundpod will send a
pairing message to the
device so that it can
connect to the other
soundpod.
2. Power on and
use as described in
operation 1.
3. Disconnect from the
1st device, then use as
described in operation
1 to pair with a 2nd
device.
DESIRED STATUS
RESULT CONDITION
Sync device Both sound-
operation pods working
(master-slave and connected
switching with device
operation)
Play/pause Audio play-
back mode
Volume up/ Audio
down playback/call
mode
Next/previous Audio play-
track back mode
Answer call Incoming call
EN
ACTION
1. Put the master
soundpod back in
the charging case.
The slave soundpod
will then reconnect
to the device within
3 seconds as master
soundpod. If this is
done during audio
playback, playback
will be paused and will
have to be resumed
manually via the
connected device.
2. Turn the master
soundpod off manually
for the slave soundpod
to enter standby mode.
Then, connect the
slave soundpod to the
device via the device
BT menu so it becomes
the master soundpod.
During audio playback,
short-press the MFB to
pause. When playback
is paused, short-press
the MFB to resume
playback.
Press the '+' or the '-'
button.
Keep the '+' or the '-'
button pressed for 2
seconds.
Short-press the MFB
19