AL-KO Classic 4.63 BR-X Plus Manual Del Usuario página 6

EC declaration of conformity
We hereby declare that this product, in the form in which it is marketed, meets the requirements of the harmonised EU
guidelines, EU safety standards, and the product-specific standards.
Product
Petrol lawnmower
Serial number
G1041048
Model
AL-KO Classic 4.63 BR-X Plus (3 in 1)
(D46BRHW-SL)
AL-KO Classic 5.13 BR-X Plus (4 in 1)
(D51BRHW-SL)
Sound power level
measured / guaranteed
AL-KO Classic 4.63 BR-X Plus (3 in 1)
(D46BRHW-SL)
95 / 96 dB(A)
AL-KO Classic 5.13 BR-X Plus (4 in 1)
(D51BRHW-SL)
96 / 98 dB(A)
Warranty
If any material or manufacturing defects are found during the statutory customer protection period, we will either repair
or replace the equipment, whichever we consider the more appropriate. This statutory period may vary according to the
legislation in force in the country where the equipment was purchased.
Our warranty is valid only if:
The equipment has been used properly
„
The operating instructions have been followed
„
Genuine replacement parts have been used
„
The following are not covered by warranty:
Paint damage due to normal wear
„
Wear parts identified by a border xxx xxx (x) on the spare parts list
„
Combustion motors – these are covered by a separate warranty from the manufacturer concerned
„
To make a claim under warranty, please take this statement of warranty and proof of purchase to the nearest autho-
rised customer service centre. This warranty does not affect the usual statutory rights of the customer relative to the
seller.
Manufacturer
AL-KO Geräte GmbH
Ichenhauser Str. 14
D-89359 Kötz
GERMANY
EU directives
2006/42/EG
2002/88/EG
2004/108/EG
2000/14/EG
Conformity evaluation
2000/14/EG
VIII
Notified body
TÜV Industrieservice GmbH
TÜV Süd Gruppe
Westendstraße 199
D-80686 München
The warranty is no longer valid if:
The equipment has been tampered with
„
Technical modifications have been made
„
The trimmer was not used for its intended purpose
„
(for example, used for commercial or communal ap-
plications)
Executive Officer
Anton Eberle
Ichenhauser Str. 14
89359 KOETZ
DEUTSCHLAND
Harmonised standards
EN 836:1997-09
EN 836/A1:1998-06
EN 836/A2:2001-10
EN 836/A3:2004-05
EN 836/prA4:2009
ISO 14982
Kötz, 2013-01-16
Antonio De Filippo, Managing
Director
GB
GB