Inflation; Area Of Use - Parkside PKZ 180 C5 Traducción Del Manual De Instrucciones Original

Compressed air hose with quick coupler
Connecting
♦ Push the compressed air connector
quick coupler of the compressed air hose
the sleeve automatically springs forwards.
Cutting
♦ Pull back the sleeve on the quick coupler of
the compressed air hose
compressed air connector
CAUTION!
► Caution! When disconnecting the quick
coupler of the compressed air hose
the coupler firmly to prevent injuries caused
by the hose flying off.
Inflation
with adapter
Schrader valve

Area of use

This application allows for a simple and accurate
inflation. The manometer
tire pressure. Thanks to the integrated release
valve it is possible to reduce the tire pressure
if it is too high.
CAUTION!
► The manometer
recommend that you check the tyre pressure
promptly with a suitable device at a petrol
station or motor vehicle workshop.
♦ Ensure that the ON/OFF switch
♦ Press the lever quick coupler
attach it.
♦ Place the lever quick coupler
and then release the lever.
♦ Insert the mains plug
a mains power socket.
PKZ 180 C5
into the
and remove the
.
, hold
is used to check the
is calibrated. However, we
is set to "O".
downwards to
onto the valve
of the compressor into
♦ Switch the ON/OFF switch
grated control lamp lights up.
♦ Pull the trigger
,
♦
Read the air pressure from the manometer
♦ Let the trigger
♦ Switch the ON/OFF switch
as the correct or permissible air pressure has
been reached. The integrated control lamp
goes out.
♦ Press down the lever quick coupler
it off the valve.
♦ Remove the mains plug
power socket.
using the valve adapter
Sclaverand valve
Dunlop valve
Area of use
The valve adapter
bicycle tires.
♦ Use the valve adapter
shown above.
♦ Connect the valve adapter
quick coupler
♦ Start by pressing the valve adapter
valve.
♦ Inflate as described above.
to "I". The inte-
.
off again.
to "O" as soon
and pull
from the mains
facilitates easy inflation of
to pump to the valves
into the lever
and then release it.
onto the
GB │ IE │
.
7 ■