Unpacking; Installation; Drive Rv 8 - VWR RV 8 Indicationes De Seguridad

Unpacking

Please unpack the device carefully.
In the case of any damage a report must be sent immediately (post, rail or forwarder).

Installation

Drive RV 8

1.) Mount the base to the lift.
2.) Remove transportation lock
• Apply Cylindrical M6x25 (F) (4x) and Serrated washer M6 (G)
(4x) to mount base (H) with Lift Unit (I) after you unpack the
package.
• Hold the lift with your hand on the height position and remove the thumb
screw (J) by turning counterclockwise on the back of the appliance.
Take care! DANGER!
Once the transportation lock has been removed, the lift moves fast to its
upper end position. The distance is approx.120 mm.
12