Ingersoll Rand 2235MAX Serie Especificaciones Del Producto página 4

Ocultar thumbs Ver también para 2235MAX Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
EN
Impacting Sound Level
Models
† Pressure (L
2235TiMAX
2235TiMAX-G
2235TiMAX-O
2235TiMAX-R
2235TiMAX-2
2235QTiMAX
2235QTiMAX-G
2235QTiMAX-2
2235PTiMAX
2235QPTiMAX
† K
= 3dB measurement uncertainty
pA
‡ K
= 3dB measurement uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 47132782 and table on page 2. Maintenance frequency is shown in a circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand office or distributor.
EN-2
dB(A)
(ISO15744)
) ‡ Power (L
p
w
98.0
109.0
98.0
109.0
91.9
102.9
91.9
102.9
98.0
109.0
91.9
102.9
WARNING
Free Speed Sound Level
dB(A)
(ISO15744)
) † Pressure (L
) ‡ Power (L
p
103.6
103.6
88.7
88.7
103.6
88.7
* K = Vibration measurement uncertainty
6.
Thread size
7.
Coupling
8.
Safety Air Fuse
9.
Oil
10. Grease
Vibration (m/s²)
(ISO28927)
) Level
*K
w
114.6
9.0
2.8
114.6
7.7
2.7
99.7
9.0
2.8
99.7
7.7
2.7
114.6
9.0
2.8
99.7
9.0
2.8
47517268_ed9
Tabla de contenido
loading

Tabla de contenido