Manual Mode - Heath Zenith 4392 Manual Del Usuario

6. Set the amount of ON-TIME you want the light
to stay on after motion is detected (1, 5, or 10
minutes).
7. Set the amount of time you want the light to
stay on in the D
ual
6 hours, or dusk-to-dawn).
Sensor Height
5 ft. (1.5 m)
30 Feet (9.1 m)
in all Directions
Maximum Range
* Without lens shield installed.
The sensor is less sensitive to motion directly
towards it and more sensitive to motion across
coverage area.
Motion
Sensor
Least Sensitive
200067-03
B mode (Off, 3 hours,
®
rite
Coverage Angle*
(Top View)
Motion
Most Sensitive
Mode:
Test
Auto
D B
®
ual rite
360°
Manual
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
for the circuitry to calibrate.
Manual mode only works at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1, 5,
or 10 position.
MODE SWITCHING SUMMARY
TEST
AUTO

MANUAL MODE

* If you get confused while switching modes, turn
the power off for one minute, then back on. After
the calibration time the control will be in the AUTO
mode.
3
OPERATION
On-Time Works: Day Night
5 Seconds
1, 5, or 10 min
Off, 3, 6 Hr,
to Dawn
Until Dawn*
MANUAL MODE
ON-TIME Switch at 1, 5,
or 10 minutes
Flip light switch
off for one second
then back on*
x x
x
x
x
/ minutes
1
2
1 Second
OFF then...
... back on.