Tabla de contenido
Idiomas disponibles
Idiomas disponibles
A Thicket blade, 3-wings, Ø 255 mm, incl.
protective cover (as spare):
Order no.: 628432000
B Grass blade, 4-wings, Ø 254 mm, incl.
protective cover:
Order no.: 628433000
C Replacement thread Ø 2 mm, wave-shaped:
Order no.: 628430000
D Replacement thread Ø 2 mm, spiral-shaped:
Order no.: 628423000
E Complete line head (complete housing incl. reel
and cutting line, (as spare)
Order no.: 628429000
F Battery packs with different capacities. Buy
battery packs only with voltage suitable for your
power tool.
Order no.: 625367000
Order no.: 625368000
Order no.: 625369000
Order no.: 625549000
etc.
Order no.: 625591000
Order no.: 625592000
etc.
G Chargers: ASC 55, ASC 145, ASC 145 Duo, etc.
For a complete range of accessories, see
www.metabo.com or the catalogue.
12. Repairs
Repairs to electrical tools must only be carried
out by qualified electricians and only with
original spare parts!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
13. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
4.0 Ah (LiHD)
5.5 Ah (LiHD)
8.0 Ah (LiHD)
10.0 Ah (LiHD)
4.0 Ah (Li-Ion)
5.2 Ah (Li-Ion)
14. Technical Specifications
Explanatory notes regarding the specifications on
page 4.
Changes due to technological progress reserved.
U
= voltage
B
= cutting width
H
= max. cutting line length
H
= cutting line diameter
X
n
= no-load speed
0
m
= weight (with the smallest battery pack)
Measured values determined in conformity with
EN ISO 11806-1, EN 60335-1, EN 50636-2-91.
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C). Permitted ambient
temperature for storage: 0 °C to 30 °C.
Recommended ambient temperature when
charging: 0 °C to 40 °C
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three
directions):
a
= vibration emission value
h
K
= uncertainty (vibration)
h
Typical A-weighted sound levels:
L
= sound-pressure level
pa
L
= Acoustic power level
WA
K
, K
= Uncertainty
pA
WA
L
= Guaranteed acoustic power level as per
WA(G)
2000/14/EC
Wear ear protectors!
ENGLISH en
19
Tabla de contenido
