Denon AVR-770SD Instrucciones De Operación página 25

5
Select the optimum mode for the source.
(Remote control unit)
MODE DOLBY PL MODE cinema MODE music
6
Select the various parameters. (See "Surround
parameters q" for a description of the various
parameters.)
(Remote control unit)
7
Set the various surround parameters.
(Remote control unit)
8
Press the SURROUND PARAMETER button to
finish surround parameter mode.
(Remote control unit)
DTS NEO:6 mode
2
STEREO 5ch/6ch DIRECT /STEREO DOLBY/DTS SURROUND SURROUND MODE STATUS TONE CONTROL BAND TUNING
MASTER VOLUME
AV SURROUND RECEIVER AVR-770SD
FUNCTION / SELECT
DVD
STANDBY SIGNAL DETECT OUTPUT AUTO PCM
DIG AUTO
ON / STANDBY PHONES SURROUND BACK INPUT MODE DIGITAL
¢
£ OFF
1
1
Select the function to which the component
you want to play is connected.
Example: DVD
FUNCTION / SELECT
(Main unit) (Remote control unit)
2
Select the DTS NEO:6 mode.
DOLBY/DTS
SURROUND
(Main unit) (Remote control unit)
• The mode switches as shown below each
time the button is pressed.
DOLBY PL II DTS NEO:6
3
Play a program source.
4
Select the surround parameter mode.
Display
MODE cinma
(Remote control unit)
To perform this operation from the remote
control unit, check that the mode selector
switch is set to "AUDIO".
ENGLISH
The DTS NEO:6 Cinema or
Music mode can be chosen
2
directly by pressing the
CINEMA or MUSIC button
on the remote control unit
1
during playback in the DTS
NEO:6 mode.
6
4, 8
5, 7 5, 7
6
5
Select the optimum mode for the source.
(Remote control unit)
MODE cinema MODE music
6
Select the various parameters.
(Remote control unit)
25