Product Features - Remington Flexibrush Steam Manual Del Usuario

Ocultar thumbs Ver también para Flexibrush Steam:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
ENGLISH
Thank you for buying your new Remington
instructions carefully and keep them in a safe place for future reference.
(
)
*
+
,
-
.
/
Before use make sure hair is clean, dry and tangle free.
Remington Flexibrush can be used without steam. When steam is required first fill the water
reservoir.
Hold the unit in a vertical position with cap end down to prevent any spillage from any residual
water left in the cap.
Unscrew the reservoir and fill with warm or cool water to the fill line. Replace the cap with
the tong still held vertically with cap end down and twist gently into place.
Plug the unit into the mains and wait for about 5 minutes.
To activate steam, gently depress the cap. The unit is designed to release with one push, just
the right amount of steam required for a small section of hair.
Separate the section of hair to be curled and wrap around the hot barrel, winding up exactly
as you would use a roller.
Press reservoir cap to release the steam. Hold the Flexibrush in place for about 8-12 seconds
– then press the curl release button and carefully draw the unit away allowing hair to unwind
automatically. Let curls spring back and cool before combing.
To change the bristles, the unit must be unplugged and cool. Unscrew the Bristle Lock Guard
(B) and slide the bristles off the barrel. Taking the other set of bristles, gently glide each row
into a groove on the barrel and push into place. Screw the lock guard securely back into place.
 5(0 ,)8 &%1B/LQGG 

PRODUCT FEATURES

Reservoir: Unscrew and fill with water, then press to activate steam
Bristle Lock Guard: When removed enables bristles to be slid on or off barrel.
When in place it acts as a guard and locks bristles into place
Heat Resistant Bristles: Two sets of soft, removable bristles that remain cool to touch
On indicator light
Curl Release: Depressing the button allows free rotation of the barrel
Heel Rest: Prevents any part of the heated barrel from touching surface area when
resting
Swivel Cord
Multivoltage: For use at home or abroad
The unit will automatically convert from 220/240v to 120 volts
2 year guarantee
INSTRUCTIONS FOR USE
®
product. Before use, please read these
120 - 240V
MULTI VOL TAGE

 
Tabla de contenido
loading

Este manual también es adecuado para:

Cb4n

Tabla de contenido