Safety Of Persons And Animals; Appliance Safety; Electrical Safety; Safety Instructions Relating To Operation - AL-KO GS 7,2 Li Instrucciones De Uso

Ocultar thumbs Ver también para GS 7,2 Li:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
GB
Before working, remove any dangerous ob-
jects from the working area, e.g. branches,
glass or metal pieces, stones.
Make sure you are standing safely.
3.4

Safety of persons and animals

Only use the appliance for the purposes for
which it is intended. Any non-intended use
can lead to injury and property damage.
Only switch on the appliance when there are
no persons and/or animals in the working
area.
Keep hands, feet and other parts of the body
away from moving appliance parts.
During the work, do not hold the branches to
be cut off tightly.
Before removing jammed branches, switch
off the appliance and wait until the cutting
blade has come to a standstill.
Appliance parts, such as engine covers and
cutting blades, can heat up considerably dur-
ing operation. Do not touch them. After
switching off, wait until the appliance has
cooled.
An improperly used and damaged re-
chargeable battery can cause vapours and
electrolyte fluid to escape. Vent the room ad-
equately and in the case of any disorders,
consult a doctor.
Upon contact with electrolyte fluid, wash off
with copious amounts of water and immedi-
ately rinse the eyes thoroughly. Then consult
a doctor.
3.5

Appliance safety

Only use the appliance under the following
conditions:
The appliance is not soiled.
The appliance show no signs of damage.
All controls function properly.
Keep all appliance handles dry and clean.
Do not overload the appliance. It is intended
for light work in the private sector. Overload
can lead to damage to the appliance.
Never operate the appliance with worn or de-
fective parts. Always replace defective parts
with original spare parts from the manufac-
turer. This ensures the security of the appli-
ance. If the appliance is operated with worn
or defective parts, guarantee claims against
the manufacturer are excluded.
18
3.6

Electrical safety

To avoid short-circuits and destroying elec-
trical components:
Protect the appliance against humidity
and do not use it in the rain.
Do not spray the appliance with water.
Do not open the appliance.
3.7

Safety instructions relating to operation

WARNING!
Risk of injury
Inadvertent switching on of the appliance
can lead to serious injury.
During lengthy pauses, secure the
appliance with the blade guard.
WARNING!
Danger of lacerations
The cutting blades continue to run after
switching off the engine. Danger of lacer-
ations when reaching into sharp-edged
and moving appliance parts.
Never reach directly into moving ap-
pliance parts after switching off the
appliance.
Wait until the cutting blade come to a
standstill before changing it or clean-
ing the appliance of cuttings.
Wear protective gloves.
Only work with sharp cutting blades.
Never leave an operational appliance unat-
tended.
Immediately release the On/Off switch in the
following cases:
in case of malfunction and unusual vibra-
tions
before clearing blockages and clogging
before removing cuttings
upon contact with dangerous objects and
foreign bodies
After contact with dangerous objects and for-
eign bodies, check the appliance for damage.
Have the appliance repaired if it has been
damaged.
Secure the appliance between working steps
by putting on the blade guard.
Safety instructions
GS 7,2 Li
Tabla de contenido
loading

Tabla de contenido