Grizzly ERB 550-3U Traducción Del Manual De Instrucciones Original página 20

Ocultar thumbs Ver también para ERB 550-3U:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 97
GB
CAUTION! The following
states how damage to the
equipment and possible injury
to people can be avoided:
Taking care of the equipment:
• Ensure that the ventilation open-
ings are not clogged.
• Only use spare parts and acces-
sories that have been supplied
or recommended by the manu-
facturer.
• Never try to repair the equipment
yourself. All work that has not
been listed in these Instructions
must only be carried out by an
authorised servicing agency.
• Treat the equipment with the
greatest care. Always keep the
equipment clean for better and
safer work. Follow the mainte-
nance instructions.
• Never overload the equipment.
Always work within the stated
capacity range. Do not use low-
power machines for heavy-duty
work. Do not operate the equip-
ment for purposes for which it is
not intended.
• Always inspect the equipment
before it is to be used. Do not
operate the equipment if safety
devices, parts of the cutting de-
vice or bolts are missing, worn
out or damaged.
• Brushes may not be attached to
machines whose speed is higher
than the maximum permissible
brush speed.
• Damaged brushes must not be
used.
• Rust discolouration or other
signs of chemical or mechanical
change on the equipment mate-
20
rial can cause premature failure
of the brush.
• Brushes must be stored in suita-
ble racks, containers or boxes so
that they are protected against
the following influences:
- High levels of humidity, heat,
water or other liquids, which
could cause damage to the
brush
- Acids or vapours of acids that
could cause damage
- Temperatures that are so
low that they could lead to
condensation on the brushes
if they are stored in an area
with higher temperatures
- Deformation of any brush
component
Electrical safety:
CAUTION! The following
states how to avoid ac-
cidents and injuries due to
electric shock:
• Never cross the extension ca-
ble while the device is operat-
ing. Always keep the extension
cable behind the device opera-
tor.
Should the power cable be-
come damaged during work,
then instantly disconnect the
power cable from the mains.
DO NOT TOUCH THE POWER
CABLE BEFORE IT HAS
BEEN DISCONNECTED
FROM THE MAINS! Risk of
electric shock.
• Before each usage, check the
mains power cable and the
extension cable for damage
Tabla de contenido
loading

Este manual también es adecuado para:

Erb 550-2sErb 550-1h

Tabla de contenido