Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SELECT USING NOZZLE CHART BELOW
(Nozzle selections may vary by model)
A
D
B
C
Also accepts TeeJet® tips
A. Adjustable Cone Nozzle
B. Red High-Volume Fan Nozzle
C. Yellow Low-Volume Fan Nozzle
D. Cap Nut
Filling
IMPORTANT: Always make sure the pressure is
released from the tank before filling or servicing.
Push/slide the pressure release valve forward
until all the pressure is released from the tank,
(Figure A), as described in Release Tank Pressure
Section. Then, and only then, is it safe to remove
pump.
1. Turn the pump counterclockwise to remove the
pump (Figure B).
2. Fill the tank to the desired level. See fill marking
on side of tank. (Always refer to chemical manufac-
turer for proper mixture).
3. Install the pump into the tank opening and turn
clockwise until tightly sealed against the tank.
1B
ASSEMBLY INSTRUCTIONS
RED HIGH VOLUME
FAN NOZZLE USES:
Lawn replacement. Kill lawn
and weeds before planting a
new lawn.
Preparing large areas for
planting of ornamental and
vegetable gardens.
OPERATING INSTRUCTIONS
Figure B
ADJUSTABLE CONE USES:
Spot spraying in or around flower
beds, trees, and shrubs.
Edging along fences, driveways,
and walkways.
Killing brush such as poison ivy,
poison oak, kudzu and wild
blackberry.
Preparing garden beds for
planting of ornamentals and
vegetables.
YELLOW LOW VOLUME
FAN NOZZLE USES:
Figure A
2B
For precision spraying in
confined areas such as
gardens and flower beds.
Page 3
Tabla de contenido
