Additional Safety Instructions - Hilti IC-BLE Manual De Instrucciones Original

2.3

Additional safety instructions

▶ When attaching to a power tool, make sure that grips and other grip surfaces are not obstructed and that
you can still hold the power tool securely.
▶ Do not attach the remote control unit to rotating parts of power tools and do not attach it to parts of the
body, such as a hand or an arm.
▶ Although the product complies with the strict requirements of the valid directives, Hilti cannot entirely
rule out the possibility of the product causing interference due to powerful electromagnetic radiation.
This can lead to incorrect operation. Similarly, Hilti cannot exclude the possibility of interference with
other electrical devices (e.g. aircraft navigation devices).
2.4 Careful handling and use of button-cell batteries
▶ Never swallow button-cell batteries. Severe internal caustic burns or death can result within 2 hours
of swallowing a button-cell battery.
▶ Make sure that button-cell batteries are inaccessible to children. Consult a physician immediately if
there is any suspicion that a button-cell battery has been swallowed or inserted into a body orifice.
▶ When replacing batteries, make sure that the correct procedure is followed. There is a risk of
explosion.
▶ Do not attempt to recharge button-cell batteries and do not short-circuit button-cell batteries. The
button-cell battery can develop a leak, explode, catch fire and injure persons.
▶ Remove and dispose of discharged button-cell batteries correctly. Discharged button-cell batteries
can develop leaks and so damage the product or injure persons.
▶ Do not damage button-cell batteries and do not attempt to take button-cell batteries apart. The
button-cell battery can develop a leak, explode, catch fire and injure persons.
▶ Do not bring a damaged button-cell battery into contact with water. In the presence of water,
escaping lithium can produce hydrogen and so lead to a fire or an explosion, or cause injury to persons.
3 Description
3.1 Product overview
3.2 Intended use
The product described is a Bluetooth receiver module with remote control unit that can be retrofitted to Hilti
vacuum cleaners. It is designed to enable wireless on/off control of the vacuum cleaner.
▶ The remote control unit is designed for mounting on a suction hose.
10 English
1
Receiver module (IC-RC)
Hole for securing screw
@
LED indicator
;
Bluetooth operating button
=
Remote control unit (IC-RM)
ON/OFF operating button
%
LED indicator
&
Hook for attachment
(
Rubber band for attachment (for attachment
)
to suction hose or power tool)
2321964
*2321964*