Care And Maintenance - Russell Hobbs 18331-56 Instrucciones

h) If you don't press all the buttons within 10 seconds, the coffee maker will revert to
"normal", and the time will show.
i) You'll have to press the T button, and start again.
activation
39 Press and release the T button. The T light will stop flashing, and glow steadily.
40 If you want to cancel the timer before brewing has started, press the T button.
leave it alone
41 That's it – leave it alone till the preset time comes round, and it makes your coffee – don't
fiddle with it, you might upset it.
finished?
42 Check that neither "T" nor "J" are showing on the display.
43 If either is showing, press and release the T or J button to remove it.
a quick cup
44 You can remove the carafe at any time. The non-drip valve will prevent coffee dripping on to
the hotplate.
45 To prevent the filter holder overflowing, replace the carafe on the stand within about 20
seconds.

care and maintenance

46 Unplug the appliance and let it cool down before cleaning or storing away.
47 Tip the contents of the filter holder into the bin – don't flush coffee grounds down the sink.
They'll build up and cause a blockage.
48 You may clean the carafe and filter holder in warm soapy water. Rinse thoroughly afterwards,
to remove all traces of soap.
49 Clean the outside surfaces of the appliance with a damp cloth.
50 Clean the inside of the coffee mill with the brush.
51 Use the sharp end of the brush to turn the screw to U, to unlock in front of the coffee mill, and
lift the cover.
52 Clean the inside with the brush, then press the cover down and turn the screw to L to lock it
closed.
53 Don't put any part of the appliance in a dishwasher.
L If you see this icon on the display, unplug the appliance, check it, then try again.
E01 If you see this message on the display, unplug the appliance, open the cover, clean out any
coffee that may have backed up, close the cover, and try again.
K If you leave the appliance plugged in, it will count 70 brewing cycles, then show K in the
display to show that it wants descaling.
K Press the J 2-10 button and the e f g buttons together, to remove K from the display.
descaling
54 Descale regularly. Use a proprietary brand of descaler suitable for use in plastic-bodied
products. Follow the instructions on the package of descaler.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
wheelie bin symbol
To avoid environmental and health problems due to hazardous substances in
electrical and electronic goods, appliances marked with this symbol mustn't be
disposed of with unsorted municipal waste, but recovered, reused, or recycled.
instructions –
more detailed instructions are available on our website:
http://www.russellhobbs.com/ifu/550979
5