EDM Product 08790 Manual De Instrucciones página 63

ES ES
Note
PT PT
Running dry can cause damage to the device. Switch the device off
before it can run dry.
▶ Hold onto the mains plug while pulling the power cable out of
EN EN
the mains socket.
▶ If necessary, pull the device out by means of the nylon cord.
▶ Lock the float switch (4) in the following position by manual ope-
ration: (see fig. 13)
FR FR
- With the float switch affixed in this position, the device is swit-
ched on permanently.
▶ Lower the device into the water at a slight angle to allow any
remaining air to escape. Make sure that the position of the float
switch (4) does not change.
▶ Plug the mains plug into a sufficiently fused mains socket.
- The device switches on.
▶ Oversee the pumping process.
▶ When the de vice starts to suck in air, disconnect the power cable
from the mains socket by holding onto the mains plug.
SHUTDOWN
Do not touch the mains plug with wet or damp hands.
▶ Hold onto the mains plug while pulling the power cable out of the
mains socket.
▶ If necessary, pull the device out by means of the nylon cord.
▶ Clean the device according to the Maintenance chapter.
▶ Store the device according to the Storage chapter.
Instruction manual
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
If the device switches off again after only a brief
period of operation, the float switch might have
come loose. Fix the float switch again as depicted.
Warning of electrical voltage
Ref. 08790 / Ref. 08791