COMPONENTS
A
Comfort Grip
B
Carrying handle
C
LEDs
D
Protective Lens
E
Lamp Housing
F
Fixing Screws (tilt function)
G
ON / OFF Switch
H
Lamp Bracket
I
Fixing Screw (turning function)
J
Base
K Connecting Cable with Safety plug
ASSEMBLING
Install the lamp bracket (H) with fixing screw (I) on the base (J). Fasten the fixing screws (F) and the fixing
screw (I).
USING
Connect the earthed plug of the working flood light to a properly fused and earthed protective contact
socket.
SWITCH ON/OFF THE WORKING FLOOD LIGHT
Press the switch (G), to turn on the lamp. The position of the rocker switch can be used to select one of
two available brightness levels.
TILT THE LAMP HOUSING
To tilt the lamp housing, loosen the two fixing screws (F), set the required tilt angle of the lamp housing (E)
and tighten the two locking screws (F) again.
TURN THE LAMP HOUSING
To turn the lamp housing, loosen the fixing screw (I), set the required rotate angle of the lamp housing (E)
and tighten the fixing screws (I) again.
CLEANING AND STORAGE
•
Clean the lamp only with a dry or slightly moistened cloth. Do not use aggressive chemicals or
abrasive cleaners.
•
Do not immerse the lamp in liquids of any kind.
•
Store the lamp indoors in a dry place, protected from dust, dirt and extreme temperatures.
•
Keep the lamp out of the reach of children.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment.
DISPOSAL
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment. Contact your local solid waste authority for
recycling information or give the product for disposal to BGS technic KG or to an electrical
appliances retailer.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed