Tabla de contenido
Idiomas disponibles
Idiomas disponibles
382957/DW412
5/8/02
9:10 AM
FIG. 8
3. NO EATING, DRINKING or SMOKING should be done in
the work area to prevent ingesting contaminated paint
particles. Workers should wash and clean up BEFORE
eating, drinking or smoking. Articles of food, drink, or
smoking should not be left in the work area where dust
would settle on them.
B. ENVIRONMENTAL SAFETY
1. Paint should be removed in such a manner as to minimize
the amount of dust generated.
2. Areas where paint removal is occurring should be sealed
with plastic sheeting of 4 mils thickness.
Page 7
7
3. Sanding should be done in a manner to reduce tracking of
paint dust outside the work area.
C. CLEANING AND DISPOSAL
1. All surfaces in the work area should be vacuumed and
thoroughly cleaned daily for the duration of the sanding
project. Vacuum filter bags should be changed frequently.
2. Plastic drop cloths should be gathered up and disposed of
along with any dust chips or other removal debris. They
should be placed in sealed refuse receptacles and
disposed of through regular trash pick-up procedures.
During clean up, children and pregnant women should be
kept away from the immediate work area.
3. All toys, washable furniture and utensils used by children
should be washed thoroughly before being used again.
Your sander is designed to accept most makes of sandpaper
including adhesive backed paper. Adhesive backed paper is
available in 1/4 sheet sizes at most hardware stores.
Tool Care
Keep your machine as clean as possible by wiping with a clean
cloth and blowing through it with air after every 5 hours of use.
Don't use harsh chemicals or solvents to clean the tool. These
chemicals could seriously damage the plastic.
Avoid overloading your sander. Overloading will result in a
considerable reduction in speed and efficiency and the unit will
become hot. In this event, run sander at a "no load" condition
for a minute or two.
Tabla de contenido
