Attaching Handle - Uline H-3107 Guia De Inicio Rapido

ATTACHING HANDLE

1. Place the door handle (13) on the right hand door
and fasten with two slotted bolts and lockwashers.
(See Figure 8)
2. Turn the handle to the open position (parallel to the
ground) and hook the lock bars (12) to the locking
cam (14). (See Figure 9)
3. With the handle still in the open position, place the
locking cam (14) over the square shank of the door
handle. The locking cam must be facing downward
as shown. (See Figure 9)
4. Hold the lock bars in position while sliding the lock
bar guides (16) over the ends of the lock bars and
through the door slots. (See Figure 9)
PAGE 5 OF 15
ASSEMBLY INSTRUCTIONS CONTINUED
Figure 8
13
1-800-295-5510
uline.com
16
12
14
5. Place the cotter pin (15) through the hole of the
square shank. (See Figure 10)
15
Figure 9
12
Figure 10
0321 IH-3107