Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Modify single zone status
In the window for modifying the operating parameters of a zone (always identified by
its indicator
E
and the name assigned to the zone
settings:
A
Set the heating setpoint: press the
on the same line as the setpoint you want to change. By pressing
choose whether to make the setpoint modification available via the zone thermostat
(VMF-E2 or VMF-E4), as follows:
(lock open): the system allows the user to modify the setpoint (+/- 3°C or
•
+/-6°C) via the zone thermostat
(lock closed): the system does not allow modifications to the setpoint via
•
the zone thermostat
B
Set the cooling setpoint: press the
on the same line as the setpoint you want to change. By pressing
choose whether to make the setpoint modification available via the zone thermostat
(VMF-E2 or VMF-E4), as follows:
(lock open): the system allows the user to modify the setpoint (+/- 3°C or
•
+/-6°C) via the zone thermostat
(lock closed): the system does not allow modifications to the setpoint via
•
the zone thermostat
C
Operating mode: use the
work with the settings given directly by the user interface associated with it (this op-
tion is activated with "LOCAL"), or force operation in one of the other modes ("AUTO",
"V1", "V2", "V3" or "AUX")
C
Type of heating: press the
in the selected zone (this option is only available in the case of a radiant system and
with correctly wired VMF-REB expansions):
•
: zone heating with the fancoil only
•
: zone heating with the fancoil and radiant floor
•
: zone heating with the radiant floor only
WARNING: in cooling mode, the system will only activate the fancoil!
D
The timed program active on the selected fancoil: to modify the timed pro-
gram, press the
(increase) and
point you want to change. By pressing
a possible OFF in the timed program, as follows:
(padlock open): if the fancoil is OFF as a result of hourly programming or
•
by the supervision control and, if a change is made to the set point or the oper-
ating mode on the user interface, the fancoil will exit the BMS block for 45 min-
utes (function only available for thermostats VMF-E19/E19I or grilles GLFxN/M);
(lock closed): the system does not allow the fancoil to abandon the timed
•
program
By pressing the
key on the lower part of the screen, you can copy the settings
of the page in ALL the system zones (a drop-down window will appear, asking for
confirmation of the operation).
To move on to the next page, press
homepage will be restored automatically if 5 minutes elapse with no interventions.
E
F
1
Room (1)
A
Set: 21.0°C
B
Set: 20.0°C
C
Mode: LOCAL
D
Prg: 0
F
), you can modify the following
(increase) and
(decrease) keys
, you can also
(increase) and
(decrease) keys
, you can also
key to choose whether to make the thermostat
key to choose which type of heating to activate
(decrease) keys on the same line as the set-
, you can also choose whether to unlock
. To return to the previous page, press
Modifying the name associated with the zone
In the window for modifying the name of a fancoil (always identified by its
indicator
A
), you can modify the string identifying the zone (
To return to the previous page, press the
stored automatically if 5 minutes elapse with no interventions.
ZONE:
B
. The
key. The homepage will be re-
A
1
ROOM 1
B
).
19
Tabla de contenido
