HoMedics enviraScape SILVER MAPLE Manual De Instrucciones E Información De Garantía página 4

Figure 2
Drip Loop
MAINTENANCE:
1. To keep water clean:
Periodically change water and clean the product according
to the water condition. Keeping the water clean prevents the
water from becoming sticky and forming micro-organisms. We
recommend distilled water to prevent mineral build-up.
2. To clean off hard water deposits on the base:
Use a mixture of vinegar and water to clean and remove any
mineral build-up on the base and pump.
3. Keeping the water at an optimum level:
Add water periodically to keep water level at an optimum level
and to avoid shortening the life of the pump. Note: Never let
the pump run dry.
4. Fountain Storage
Unplug the fountain from the electrical outlet, empty the water,
and store in a dry, cool place.
6
• To clean the pump:
Unplug from electrical outlet. Disassemble the fountain and
-
remove the 2 screws at the top of the Pump Cover (E) using
a Phillips head screwdriver. Grasp the Water Supply Hole
+
and gently lift the Pump Cover to gain access to the Pump.
Remove the Pump Cover at the Water Supply Connector. Use
a small brush or stream of water to remove any debris (Fig. 3).
Figure 3
PVC Tubing
Inserts Here
Impeller
Pump Inlet
Front Plate
Flow Control Lever
Caution:
All servicing of this fountain must be performed by authorized
HoMedics service personnel only.
7
Back Plate
Housing
Suction Feet