Changing Polishing Belt - HOLZMANN MASCHINEN PSM2 Manual De Instrucciones

¡ERROR! UTILICE LA PESTAÑA INICIO PARA APLICAR ÜBERSCHRIFT 1 AL TEXTO QUE DESEA QUE
APAREZCA AQUÍ.
12.2

Changing polishing belt

First step: Cut the sanding belt according to the template (640x200mm
Second step: Wrap the sanding belt around the roll and insert the ends into the holes. For
normal sandpaper, the resulting gap must be filled. This is best done with a piece of folded paper.
For thicker abrasives, e.g. Abrasive flow, the placeholder is omitted
Third step: Clamp the abrasive by turning the side clamping screws in opposite directions.
Please use suitable open-end wrenches for this.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 25
PSM 2 / PSM 3