Tabla de contenido
Idiomas disponibles
Idiomas disponibles
8.
BATTERY CAPACITY INDICATOR
9.
BATTERY PACK RELEASE BUTTON *
10. LED LIGHT
11. ON/OFF SWITCH
12. BIT CLIP
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type Designation KUA72 KUA72.1 KUA72.91
(A72 - designation of machinery, representative
of drill)
Voltage
No load speed
Number of clutch
positions
Max torque
Chuck capacity
Steel
10
Max. drilling
capacity
Wood
EN
Machine weight
Battery capacity
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K
&K
pA
wA
Wear ear protection.
VIBRATION
INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841-1& EN 62841-2-1:
KUA72
KUA72.91
KUA72.1
20V
Max**
0-600/0-2000/min
18+1
65 N.m
13 mm
13 mm
40 mm
2.0 kg
1.4kg
4.0 Ah
/
L
= 71 dB(A)
pA
L
= 82 dB(A)
wA
5 dB(A)
Drilling into metal
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways
in which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ACCESSORIES
KUA72
6A Charger
1
(KAC21)
4.0Ah Battery
2
pack (KAB21)
Double ended
1
bits (PH2/SL5.5)
Hook
1
Bit Clip
1
Vibration emission value
a
= 1.246 m/s²
h,D
Uncertainty K = 1.5 m/s²
KUA72.1
KUA72.91
1
/
2
/
1
1
1
1
1
1
Tabla de contenido
