Allen + Roth VICTORIA HARBOR LP8242LCH Manual Del Usuario página 9

ASSEMBLY INSTRUCTIONS
WARNING
To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before
hanging.
NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as
it must be grounded for safe operation.
WARNING
The fan must hang with at least 7 ft. of clearance from the floor to blades.
8. Securely attach the hanger bracket (B) to the
outlet box (not included) using the outlet box
screws and washers supplied with the outlet
box.
WARNING
The outlet box must be securely anchored.
Hanger bracket must seat firmly against outlet
box. If the outlet box is recessed, remove
wallboard until bracket contacts box. If bracket
and/or outlet box are not securely attached, the
fan could wobble or fall.
9. Carefully lift the assembly and seat hanger
ball of the downrod (C) on the hanger bracket
(B). Be sure the groove in the ball is lined up
with tab on the hanger bracket (B).
WARNING
Failure to seat tab in groove could cause damage
to electrical wires and possible shock or fire
hazard.
To avoid possible shock, do not pinch wires
between the hanger ball assembly and the
hanger bracket.
8
B
9
C
9
Lowes.com/allenandroth
B