Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Troubleshooting
INCOMPLETE DATA
INTERCOM or
INTERCOM FROM
LINE IN USE
LINE ON HOLD
LONG DISTANCE
LOW BATTERY
NEW
NEW CALL XX
NO CALLS
NO BATTERY
NO CALLER INFO
FROM CELL PHONE
NO DATA
OUT OF RANGE
REPT
SEARCHING
SPKR
UNKNOWN CALLER

VOICEMAIL #

** EMPTY **
40
All manuals and user guides at all-guides.com
CID information is interrupted during transmission or the phone line is
excessively noisy.
Someone pressed the intercom button on the base or handset.
Displays on handset while the line is in use.
Indicates hold button has been pressed on the cordless handset to put
land line call on hold.
Indicates CID record is from a long distance call.
Indicates the battery needs to be charged.
Indicates call or calls which have not been reviewed.
XX represents the number of new CID records not reviewed.
Indicates there are no CID records in memory.
Indicates the battery is not properly installed in the handset, or the
battery pack is not properly connected to the jack inside the battery
compartment.
Indicates the docked cell phone is not able to send out the CID data.
Indicates no CID information was received , you are not subscribed to
CID service, or CID service is not working.
Indicates handset is too far away from the base or that the power to
the base unit is disconnected. Move closer to the base, and make sure
that the AC power adaptor is connected to the base.
Indicates a repeat call message. Indicates a new call from the same
number was received more
than once.
Indicates handset is searching for the base.
Indicates speaker function has been activated.
Indicates incoming call is from an area not serviced by CID or the CID
information was not sent.
Indicates that user has not set the voicemail number prior to dialing.

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

23210

Tabla de contenido