Allen + Roth GCBN80022 Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
Loosen and remove the decorative nut (C)
1.
and mounting bracket assembly (CC) from
the canopy (A).
Attach the mounting bracket assembly (CC)
2.
to an outlet box (not included) with outlet box
screws (AA).
Note: The preassembled nipple on mounting
bracket assembly (CC) should point outward.
Hardware Used
Outlet box screw
AA
Mounting bracket
CC
assembly
Determine desired length for fixture. If no additional
3.
rods besides the 2 preassembled 3 in. rods (E) are
necessary, skip to step 9. Otherwise, loosen and
remove the preassembled orange wire connectors
and fasteners on the back of canopy (A), then pull
the LED wires (D) out from the canopy (A) and
threaded tube assemblies (B).
1
2
x 2
x 1
3
A
B
4
CC
C
Outlet box
Orange wire connector
Lowes.com/allenandroth
A
A
CC
AA
F
D
Fastener
B
D
®