General Safety Instructions - Yamato TC 350/13 Manual De Instrucciones

GENERAL SAFETY INSTRUCTIONS

Before attempting to operate this machine, you must read,
understand and follow these instructions very carefully as they
are intended to ensure your safety and that of others and also a
long and trouble-free service life of the machine.
Learn how to use the power tool, its limitations and potential
hazards.
Keep these instructions in a safe place for future reference.
Avoid unintentional starting - Unplug the power tools
Before starting the power tool, always make sure that you have
removed the key and adjusting wrenches.
Before plugging the tool into the mains supply, always make
sure that the switch is in the OFF position.
Make sure that power tools are disconnected from the mains
supply when not in use, prior to servicing, lubrication or
adjustment and when replacing accessories such as blades,
bits and cutters.
Check damaged parts
Before using the power tool, always inspect it carefully to
determine that it will operate properly and perform its intended
function.
Check correct alignment of moving parts, making sure they do
not bind. Check for any damaged components and make sure
that the power tool has been correctly assembled.
Check for any condition that may affect operation of the power
tool.
Unless otherwise indicated in this instructions handbook, a
guard or any other part of the power tool that has been damaged
must be repaired or replaced by an authorized service center.
Any switch that does not work correctly must be replaced by an
authorized service center.
Do not use the power tool if the ON/OFF switch does not turn
the power tool ON and OFF.
Dust generated when machining materials is a health hazard.
Always wear a suitable dust mask.
When working, always wear personal protective equipment:
safety goggles, gloves, mask, ear protectors, non-slip safety
shoes.
Never wear loose clothes or jewelry that may be trapped in
moving parts; long hair must be tied back.
Always work on a stable base.
Always fasten the workpiece securely with a clamp.
Keep the work area clean and tidy.
Always use the power tool with both hands.
Never open or modify the power tool or its accessories in
any way.
Do not expose the power tool to rain, or use in damp or wet
locations. Keep the work area well lit.
Do not use power tools in areas where there is a risk of explosion
or fire from combustible materials, flammable liquids, paint,
varnish, petrol etc. flammable gases and dust of an explosive
nature.
Beware children and pets
Children and pets should be kept out of the work area.
All power tools should be kept out of the reach of children and,
preferably, stored or locked in a secure cabinet or dry room
when not in use.
Use the right tool
Select the right tool for the job. Do not use a tool for a job for
which it was not designed. Do not force a small tool to do the
job of a heavy-duty tool. Do not use tools for purposes not
intended.
Do not force the power tool
The power tool will do a better and safer job and give you much
better service if it is used at the rate for which it was designed.
19
GB