Honeywell Home VisionPRO 8000 Smart Guia De Instalacion página 7

Connecting to Wi-Fi
After installer setup, you will be prompted to connect to a Wi-Fi network.
NOTE: If you select No, the homeowner
can connect to the Wi-Fi network later.
(See "Connecting to Wi-Fi later" on
page 9 or in the User's Guide.) The
thermostat will display its Home screen
and thermostat setup is complete.
1 Connect to the Wi-Fi network now.
1.1 Press Yes.
The thermostat will scan for available
Wi-Fi networks.
1.2 Use the arrow buttons to scroll up/
down or left/right. Press the Wi-Fi
network name, then press Select.
NOTE: If the Wi-Fi network name is
hidden, see "Connecting to a hidden Wi-Fi
network" on page 10.
1.3 When prompted, press the screen to
edit the password (if necessary).
Enter the password.
Press the s or t buttons to change
the letter or number.
Press the
next character, or the
move to the previous character.
Use the s or t buttons at the
bottom to change letter case.
Press Done when complete.
1.4 The screen will let you know when the
connection is successful. Press Done
when the connection is successful.
If the connection is not successful,
the screen will explain why not. See
"Unsuccessful connection" on page
9. Follow instructions on the
screen to try again.
NOTE: Press the Help button for more
information about an unsuccessful connection.
button to move to the
button to
Wi-Fi network now?
Select Wi-Fi Network
Enter Password
Press Here to Edit
Delete
AC
7
Connect to a
Finding Networks
Please Wait
Your Network
Space
Connection
Successful
M35345
M35349
M35347
M35350
M35346
M35360
M35351