Optional Connection - Tripp-Lite SmartOnline SU10KRT3U El Manual Del Propietario

Optional Connection

The following connections are optional. The UPS system will function properly without
these connections.
USB and RS-232 Serial Communication Connection
1
1a 1b
Use the included USB cable or RS-232 DB9 serial cable to connect the
communication port of your computer to the communication port of your UPS. Install
on your computer the Tripp Lite PowerAlert Software appropriate to your computer's
operating system. Consult your PowerAlert manual for more information.
1a
USB Communication Port Note: The USB port may be used to connect your UPS to a
workstation or server. It is used with Tripp Lite software and the included USB cable to
monitor and manage the UPS remotely over a network and to automatically save open
files and shut down equipment during a blackout. See "Optional Connection" for
details. For USB communications, both DIP switches must be in the ON position. This
will disable the RS-232 port.
1b
11
201102089 93-2982.indb 11 7/11/2011 3:49:02 PM