Declaration Of Conformity; Environmental Protection - Ratio AR850NM Manual De Instrucciones

angle grinder motor or break the disc.
When cutting, only cut in the opposite direction to
the disc rotation. If you cut in the same direction
as the disc rotation the disc may push itself out
of the cut slot.
When cutting very hard material best results can
be achieved with a diamond disc.
When using a diamond disc it will become very
hot. If this happens you will see a full ring of
sparks around the rotating disc. Stop cutting and
allow cooling at no load speed for 2-3 minutes.
Always ensure the workpiece is firmly held or
clamped to prevent movement.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional
lubrication or maintenance.
There are no user serviceable parts in your
power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots
clean. Keep all working controls free of dust.
Occasionally you may see sparks through the
ventilation slots. This is normal and will not
damage your power tool.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authorities or retailer for recycling
advice.
40
DECLARATION OF
CONFORMITY
We
EHLIS S.A.
NIF. A-08014813
c/. Sevilla s/n. Polígon Industrial Nord-Est
08740 Sant Andreu de la Barca
Barcelona-España
Declare that the product,
Description Angle Grinder
Type AR850NM(PGA- designation of
machinery, representative of sander and
grinder )
Function Peripheral and lateral grinding
Complies with the following Directives,
2006/42/EC
2014/30/EU
2011/65/EU
Standards conform to
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 60745-1
EN 60745-2-3
Date:11/17/2016
Company name: Ehlis S.A.
CEO: Alejandro Ehlis