brondell easy bidet FreshSpa FS-10 Manual Del Propietário página 9

Installation
4) Connect Bidet Hose to T-Valve
a. Connect one end of the white PVC
Bidet Hose to the remaining open side
of the installed 7/8" T-valve.
5) Install Bidet Attachment on Toilet
a. Place large rubber washers over the
open bolt holes in the toilet fixture.
b. Place bidet attachment over
washers so the nozzle is as close to
the back of the toilet bowl as it will go.
This will vary by toilet.
c. Make sure the adjustable brackets
line up with the holes in the toilet
fixture. You may need to move the
adjustable brackets accordingly to
line up properly.
d. Replace the toilet seat on top of
bidet attachment and secure using
original toilet seat hardware. Make
sure to tighten so that the bidet
attachment and seat do not move.
Step 5
7