brondell easy bidet FreshSpa FS-10 Manual Del Propietário página 10

Installation
6) Connect Bidet Hose to Bidet Attachment
a. Connect open end of bidet hose to the
brass connection on the bottom side of
the bidet attachment.
7) Turn on Water Supply & Check for Leaks
a. Open the main water supply valve slowly and check for
leaks.
b. Wait 5-10 minutes, check again and if there are no leaks
continue.
Note: if there is any leaking, check all rubber washers and make
sure all water connections are tight and secure. If necessary,
you can use plumbers tape for any leaking connections.
8
Step 6a